bigtrkltltrl
Observer
I have some family things going on that are forcing me to sell my trailer and rig.
January of 1970 Appleby S/N 9. 3 bed tent trailer made for expo travel. Hard wood flooring installed with interior and exterior LED lighting and a Dual USB charging outlet. Brand new plywood bed platforms painted with "Behr" deck over paint. Dual 7 gallon water carrier. Tongue battery box installed with 12v battery. All exterior trailer lights are LED. Axle is flipped for clearance. Extended tongue 3 feet new tongue jack. Very light trailer less than 750lbs so no registration (taxes)!is needed. Canvas is out getting repaired right now. It is original as far as I know. It is getting new zippers installed and reinforcing panels installed around the pole areas. When I get it back I will take the camper out and add current pictures. Some of these pictures are taken before I took it apart and repaired it. The brand new Max Coupler class 3 hitch "IS" included along with the matching locking pins for both sides. I will include the Thule roof rack with the three grey boxes with the sale.
I had plans to install a tank top heater in the front hole in the camper but never got around to it. There are probably things I missed. Feel free to ask any questions or concerns.
PM me for any questions. I will also put a link in for the build thread.
I am wanting to get $3,000 obo for the trailer. The trailer is located in Provo Utah.
Sent from my iPad using Tapatalk
January of 1970 Appleby S/N 9. 3 bed tent trailer made for expo travel. Hard wood flooring installed with interior and exterior LED lighting and a Dual USB charging outlet. Brand new plywood bed platforms painted with "Behr" deck over paint. Dual 7 gallon water carrier. Tongue battery box installed with 12v battery. All exterior trailer lights are LED. Axle is flipped for clearance. Extended tongue 3 feet new tongue jack. Very light trailer less than 750lbs so no registration (taxes)!is needed. Canvas is out getting repaired right now. It is original as far as I know. It is getting new zippers installed and reinforcing panels installed around the pole areas. When I get it back I will take the camper out and add current pictures. Some of these pictures are taken before I took it apart and repaired it. The brand new Max Coupler class 3 hitch "IS" included along with the matching locking pins for both sides. I will include the Thule roof rack with the three grey boxes with the sale.
I had plans to install a tank top heater in the front hole in the camper but never got around to it. There are probably things I missed. Feel free to ask any questions or concerns.
PM me for any questions. I will also put a link in for the build thread.
I am wanting to get $3,000 obo for the trailer. The trailer is located in Provo Utah.
Sent from my iPad using Tapatalk
Last edited: