Dolomiti
Adventurer
I recently imported a 3 door former MOD 110 and am planning to do a significant amount of work.
I am planning to go ahead and replace the suspension with OME springs and shocks. I eventually plan to add a dormobile kit to the 110, so I think I might need some rear springs which can handle the extra weight. Through ARB AU, I put together the following...
STEEL BULL BAR & WINCH - 300 KGS LOAD
Recommended for vehicles with steel bull bar and carrying loads of 300kg to GVM. Optimum performance will be achieved with loads of 300kg to 500kg. Front lift: 30mm, rear lift: 40mm.
Coil Springs (Front) (2767 x 1 pair)
Coil Springs (Rear) (2755 x 1 pair)
Nitrocharger Sport Shock (Front) (60037 x 2)
Nitrocharger Sport Shock (Rear) (60039 x 2)
Steering Damper (OMESD32 x 1)
Castor Correction Kit (CALR2 - SUITS 44 x 1)
I have pulled all the relevant part numbers for the bushings that I'll need for the steering/sway-bars/suspension, but I am thinking about going with Energy Suspension poly bushings. Unfortunately, I cannot find any cross references for the sizes that I'll need. Has anyone else gone this route?
So far I've emailed Rovers North (no answer), Rocky-Road Outfitters (no answer), VDO Vision (you'll have to figure out what you need on your own), and Energy Suspension Parts (contradictory info, then a rude, no we don't support any Land Rovers).
Any help would be greatly appreciated.
I am planning to go ahead and replace the suspension with OME springs and shocks. I eventually plan to add a dormobile kit to the 110, so I think I might need some rear springs which can handle the extra weight. Through ARB AU, I put together the following...
STEEL BULL BAR & WINCH - 300 KGS LOAD
Recommended for vehicles with steel bull bar and carrying loads of 300kg to GVM. Optimum performance will be achieved with loads of 300kg to 500kg. Front lift: 30mm, rear lift: 40mm.
Coil Springs (Front) (2767 x 1 pair)
Coil Springs (Rear) (2755 x 1 pair)
Nitrocharger Sport Shock (Front) (60037 x 2)
Nitrocharger Sport Shock (Rear) (60039 x 2)
Steering Damper (OMESD32 x 1)
Castor Correction Kit (CALR2 - SUITS 44 x 1)
I have pulled all the relevant part numbers for the bushings that I'll need for the steering/sway-bars/suspension, but I am thinking about going with Energy Suspension poly bushings. Unfortunately, I cannot find any cross references for the sizes that I'll need. Has anyone else gone this route?
So far I've emailed Rovers North (no answer), Rocky-Road Outfitters (no answer), VDO Vision (you'll have to figure out what you need on your own), and Energy Suspension Parts (contradictory info, then a rude, no we don't support any Land Rovers).
Any help would be greatly appreciated.