I've put 30,000 miles on my Carli Suspension over the last few years. Lately I've noticed a little slop in the front end and the truck wanders a bit. Today I tok advantage of some warm weather and rotated my tires. While I was at it I looked over the front suspension. Ball joints seem good and the BD steering brace is all tight.
I had the wife jump in the truck and move the wheel side to side and I think I found the culprit. The Carli adjustable track bar has a lot of play in the bushing where it attaches to the frame. I figure a good 1/8" of play. The bolt is tight and does not move. I'm a little bummed it wore that quick with little off road use and no abuse. Should I replace the bushing or replace the track bar? Is their a better bar on the market?
I had the wife jump in the truck and move the wheel side to side and I think I found the culprit. The Carli adjustable track bar has a lot of play in the bushing where it attaches to the frame. I figure a good 1/8" of play. The bolt is tight and does not move. I'm a little bummed it wore that quick with little off road use and no abuse. Should I replace the bushing or replace the track bar? Is their a better bar on the market?