Paul Davenport
Observer
Hi folks. I have a 2009 JKU and a couple years ago installed a 7-pin trailer harness (bought from Chrysler). Since then it's worked fine but recently I found I am not getting power to the trailer running lights, or more specifically no power to the pin/blade on the vehicle plug that powers the trailer running lights. The brake/turn lights work fine. The PNP connectors appear solid, all fuses are good, and the vehicle tail lights operate.
I found two old threads on other forums with the same issue but there are no solutions posted and the OP's haven't replied to PM's to see how they resolved the issue. Anyone out there experienced this specific problem? And more importantly, found a solution?
I'll start tracing wires and looking for a short but since I found others have had the same issue in the past I thought this might be a malfunction I'm overlooking.
Thanks! Any help is much appreciated!
I found two old threads on other forums with the same issue but there are no solutions posted and the OP's haven't replied to PM's to see how they resolved the issue. Anyone out there experienced this specific problem? And more importantly, found a solution?
I'll start tracing wires and looking for a short but since I found others have had the same issue in the past I thought this might be a malfunction I'm overlooking.
Thanks! Any help is much appreciated!