BrettDez
Overland Explorer
Hello everyone!
.
I purchased my M101CDN from a fellow Expo member here and have since converted it to a Spring Over Axle setup with 35s. The trailer height is now perfect and gives great clearance for getting over rocks while crawling with the trailer in tow!
.
I do have one issue though. The suspension is still pretty stiff! While moving along the trail, the trailer can very easily turn bumps into "jumps" as it hops about. And this is still at slow speeds of only 5 to 10mph! So for the trailer's sake and for the sake of all my gear inside I would like to soften the ride up.
.
Goal is to soften the ride up but not completly redesign the suspension as my fabricating skills are limited and with a big trip coming up I don't want to get in over my head.
.
.
My initial thought is to simply remove some of the leafs from the leaf pack. My experience is with coil spring suspensions....never really done anything with leaf springs before. Does anyone know which leafs I should remove or how many? I don't want to spend all the effort to remove too few or the wrong ones to have no effect and at the same time I don't want to remove too much and now cause an issue with the suspension not dealing with the weight. Trailer probably weighs around 1200-1400 fully loaded.
.
So, any ideas on what leafs and how many to remove? Small ones? Big ones? Every other one? A group together?
.
And also...I hate to sound incapable, but how exactly do I remove leafs from the overall pack? I'd rather ask now than curse about trying to figure it out on my own while bleeding from the head!
.
.
I have also heard that you can swap out the leaf springs entirely to a Suzuki Samurai OME kit. Has anyone actually done this? Was it effective? And what kit speciffically was used?
.
.
Here is a picture of the leaf pack that I took while doing the spring over axle conversion:
.
I purchased my M101CDN from a fellow Expo member here and have since converted it to a Spring Over Axle setup with 35s. The trailer height is now perfect and gives great clearance for getting over rocks while crawling with the trailer in tow!
.
I do have one issue though. The suspension is still pretty stiff! While moving along the trail, the trailer can very easily turn bumps into "jumps" as it hops about. And this is still at slow speeds of only 5 to 10mph! So for the trailer's sake and for the sake of all my gear inside I would like to soften the ride up.
.
Goal is to soften the ride up but not completly redesign the suspension as my fabricating skills are limited and with a big trip coming up I don't want to get in over my head.
.
.
My initial thought is to simply remove some of the leafs from the leaf pack. My experience is with coil spring suspensions....never really done anything with leaf springs before. Does anyone know which leafs I should remove or how many? I don't want to spend all the effort to remove too few or the wrong ones to have no effect and at the same time I don't want to remove too much and now cause an issue with the suspension not dealing with the weight. Trailer probably weighs around 1200-1400 fully loaded.
.
So, any ideas on what leafs and how many to remove? Small ones? Big ones? Every other one? A group together?
.
And also...I hate to sound incapable, but how exactly do I remove leafs from the overall pack? I'd rather ask now than curse about trying to figure it out on my own while bleeding from the head!
.
.
I have also heard that you can swap out the leaf springs entirely to a Suzuki Samurai OME kit. Has anyone actually done this? Was it effective? And what kit speciffically was used?
.
.
Here is a picture of the leaf pack that I took while doing the spring over axle conversion:
![936704_563830149485_1645438412_n.jpg](https://scontent-b-lga.xx.fbcdn.net/hphotos-prn1/t1.0-9/936704_563830149485_1645438412_n.jpg)