T100/Pickup/4Runner front end parts

[Trail100]

*Reduced prices from last post - need to clean out garage - everything must go*

Looking to sell the pile of parts off of my '95 T100 4X4 to raise money for my trailer project. Some parts interchangeable between models:

Aisin hubs: $50 *SOLD*
Calipers with pads (factory reman. used only 6 mos.) fit all years of 4WD T100 and 91-95 2 and 4WD 4 Runner $80
Both axle shafts: $40
Toytec ball joint spacers and modified control arms: $100 *spacers SOLD*
Fairly new tie rod ends (inner/outer, both sides): $25
Torsion bars and brackets: cheap make offer
Lower control arms with ball joints: cheap make offer

Not pictured:
Lower control arms: cheap make offer
Knuckle/spindle with upper ball joints attached: cheap make offer
Hubs with bearings and rotors: cheap make offer

Shipping not included, but will ship most economical way possible and will consider rushed shipping at buyers request.

All parts in working order when removed and will include necessary mounting hardware if applicable. Ask anything, make offers at will.

Thanks for looking.

 

[Trail100]

Prices reduced!

 

[jh504]

What kind of shape are the bushings in the lower control arms in?

 

[Trail100]

Well used I guess would be a good description. The truck had about 170K when I took everything off, likely original, some cracking and one has the corner peeling off but no excessive play when they were part of the truck from what I remember.

 

[jh504]

I hear ya. I was about to buy some new bushings so I figured I would ask. They dont cost too much so I think I will just go with new ones, since mine have about the same miles as yours.