Looking good. I see your from Johnson County, grew up as a kid Edwardsville/Bonner Springs, but living in Jefferson City, MO now.
We won't be staying in this area for much longer, but we've enjoyed JC for a couple years. I've signed with a great company in Wichita KS, we're excited to move our adventures out there and be closer to Colorado. If we don't like Wichita then in a few years we'll likely head back to San Diego.
.
.
.
.
I haven't had that much time to work on the trailer, but I've got almost 100% of the parts needed. Mostly still waiting on the custom kitchen side box from truckbox.com. Their lead time isn't short for custom work and their prices are sky high for a one off, but they are making me exactly what I want. Can't wait for it to arrive.
.
.
.
For now I've mounted the Alu-Cab Shadow awning. The factory Alu-Cab Frontrunner brackets worked with well with some modifications. First I ordered passenger side brackets, started cutting on them only to realize the angled top piece was going to hit the tent. I had 3 options, move the tent and drill more holes in it, weaken the bracket or order a drivers side set of brackets and flip them. It worked perfectly. The awning raises up and down with the tent. It's really slick and VERY stable. I do need to weld up a couple of 45* brackets that will move the awning up and away from the tent as it make zipping the tent very difficult, I'll tackle that one once it warms up a little more.
.
I'll get photos of it all opened up this weekend.
.
Also, since I'm running both low and high pressure propane I needed a dual regulator system. This is what I have so far, I'm going to have custom braided stainless lines made for each run. There will be a 16" or so run from the regulators to the bulkhead propane inlets that get the propane into the trailer, once in the trailer each appliance will have it's own 12v operated ball valve allowing for isolation of each appliance. After the ball valves the HP propane (27psi) will go to the Partner Stove and the LP propane (.5psi) will go to the L5 water heater, propax heater and a rear QD fitting for the Weber Q grill.
Next week I should have my perforated aluminum needed to make the electrical panel in the nose box. The electrical will keep me busy for a few days...