J
JWP58
Guest
Finally scored an ARE utility topper for my Tacoma........for 150.00 bucks. Super stoked.
Now I can finally build a drawer system in the bed.
Has anyone used foam sheeted insulation on these aluminum toppers? If so what kind of adhesive did you use? (I assume some type of spray would be best). I plan to insulate the top and sides with this =
http://www.lowes.com/pd_15358-1278-3/4X48X96+R-TECH_4294858106__?storeNumber=1969&selectedLocalStoreBeanArray=%5Bcom.lowes.commerce.storelocator.beans.LocatorStoreBean%404f324f32%5D&pl=1&productId=50100630&ipTrail=174.45.179.105&Ns=p_product_qty_sales_dollar%7C1¤tURL=%3FNs%3Dp_product_qty_sales_dollar%7C1
And maybe cover the sheet pieces in some type of felt or fabric....
http://www.onlinefabricstore.net/dark-gray-felt-fabric-.htm?cvsfa=2700&cvsfe=2&cvsfhu=383539&utm_source=google&utm_medium=cpc&utm_campaign=Google+-+%28Product+Listing+Ads%29&utm_term=pla&utm_content=rJRqbtz8d{device}|pcrid|38173918093|pkw|pla|pmt|e|
And then put in two slider vents in the side doors like this....
http://www.deer-creek.org/parts
With pop rivets (and to be honest, cutting the exterior skin kinda scares me because if I F it up....its pretty permanent).
Pics to follow....
Now I can finally build a drawer system in the bed.
Has anyone used foam sheeted insulation on these aluminum toppers? If so what kind of adhesive did you use? (I assume some type of spray would be best). I plan to insulate the top and sides with this =
http://www.lowes.com/pd_15358-1278-3/4X48X96+R-TECH_4294858106__?storeNumber=1969&selectedLocalStoreBeanArray=%5Bcom.lowes.commerce.storelocator.beans.LocatorStoreBean%404f324f32%5D&pl=1&productId=50100630&ipTrail=174.45.179.105&Ns=p_product_qty_sales_dollar%7C1¤tURL=%3FNs%3Dp_product_qty_sales_dollar%7C1
And maybe cover the sheet pieces in some type of felt or fabric....
http://www.onlinefabricstore.net/dark-gray-felt-fabric-.htm?cvsfa=2700&cvsfe=2&cvsfhu=383539&utm_source=google&utm_medium=cpc&utm_campaign=Google+-+%28Product+Listing+Ads%29&utm_term=pla&utm_content=rJRqbtz8d{device}|pcrid|38173918093|pkw|pla|pmt|e|
And then put in two slider vents in the side doors like this....
http://www.deer-creek.org/parts
With pop rivets (and to be honest, cutting the exterior skin kinda scares me because if I F it up....its pretty permanent).
Pics to follow....