Search results

got it. the hole in the washer that i had to use is to small and was touching the sides of the post. oooops. will drill it out or bigger one. thanks all.

checked with new coax i do not have meter to check any other way.

ground is under mounting tab,where the contact to the bumper and washer would ground. then i ran #10 wire to a factory ground point in the engine bay, sanded the paint off and the put together.

i had to add a washer on the underside because the hole in the tab on the bumper is 9/16. so after your last replyim thinking the yes it is not grounding to the post sides with the washer im using. coax is good i have checked it with new coax.

ground is under mounting tab,where the contact to the bumper and washer would ground. then i ran #10 wire to a factory ground point in the engine bay, sanded the paint off and the put together.

ground is under the mounting tab where the washer would contact for ground. then i ran a #10 wire to the engine bay to a factory ground point and even sanded the paint off the put back together.

ground is under mounting tab,where the contact to the bumper and washer would ground. then i ran #10 wire to a factory ground point in the engine bay, sanded the paint off and the put together.

plastic washer is in right way, and i have added a ground insted of grinding powder coat. all i can think of is my ground is still not right . but if that is the case im not sure what to do.

thanks all. so this is what i have tried. second antanna and coax cable and still nothing. because it is on an arb insted of grinding the powder coat i added a ground back to the body. cant seem to see what the hang up. we have done so many mods and this is the first one to hang me up. i have...

thanks for your reply. i have done all that your note said but still very high reading,12 on the swr meter that i have. any other hints i might try. steve.

help. i have just installed a cb in my rig and cant seem to get it to work. when i test the swr it is in the red 12 on the meter. i have a firestik11 with a uniden 520 radio. the antenna is mounted on a arb bumper which is powder coated so i added a ground back to the body and still no luck. can...

im looking at two antannas and would like some input. wilson flex or firestik fsll. i have herd that the firestik is better but like the flex of wilson. any comments are welcome. thanks

sweet bumper, the clearence is a little close dont you think, once you hit the trail you will get a lot of movement. im worried it will hit the back of you rig.