Search results

Hey Ronin, haven't been on Expo much lately, just look'n at what been happening, came across your build and am very Impressed, My rig is a '10 Access Cab, good for the single guy but again very impressed with your rig ~ you've given me more ideas . . . Thanks Scott PS: Where's Tahuya State...

As a Transplant from that little town south of Coeur D' Alene, ID, they called it LA, I have been working Wildland Fire since 1988 in Northern Idaho and I would recommend following the "1910 Fire History" the Palous, St. Maries, St. Joe through Avery the valley of "Ghost Cedar Trees" it will...

Hi Guys, Just my .02, but living in Northern Idaho, I have been running KM2 235/85/16 from Tire Rack on a stock 2010 Toyota Steelie for the past 2yrs, from Mud up to the axle to 3+ feet of snow and the trick / advice is learn to air them down, my normal psi is 38/40psi Hwy and 20/9psi off road...

Know the name, but can't place the face. I'm not familiar with what lights you used for the ground lights, but 20" ? bar is amazing Thanks again Scott ps: I'm looking at early retirement . . . by 2 years HUMMMMM What to do

You used Baja Design lights, over Light Force or others, how did you come to choose Baja Design . . . . But I am very impressed with the light output in the photos Thanks Scott

So are they coming state side or will this be another tease . . :coffee:

Great pics of MT., and the FAM., now I need to take your lead and get out and fish

Keith- L O V E the R A L L Y, Give me a call please, thx Scott

Welcome to the Toyota world, Mine was a 1987 and I put 380,000 miles before having to rebuild, now a couple of Mexican gardeners have it and I'm sure it's still going. I built it stock for the baja races and well the rest is history, "and history you will make, young jedi" Yota voice . . . . lol

Shall we move on to our next project together "Oliverlove" LOLOLO til the next project

Well I'm back and here is what I have learned: READ ALL INSTRUCTIONS !!! With that being said, Thank you to all that have responded, and to those that I have called (ARB), In the front page there is a chart that states; In the instructions for the ARB Bumper 3423130, ARB Combo Bull Bar with...

I don't have the set up sheets with me I'll have to double check, but I do recall it just had a chart with the bolt sizes and what the torque is for each bolt, I'll check and get back on this. Thanks guys for your help and input

The 3423130 WBAR TACOMA 05-11 w/fog

Well as with Oliverlove, I too did a ARB install only with a 2010 Access Cab, everything went as expected, well almost except when placing the outer support bracket and I went to crank in the recommended touqure at 57lbs to the bolt that went through the main frame it started to crush the...

Hey Chris, Loooooook'n good bro, What type of ground / rock lights did you put in ??

I've incorporated this into my notes for my build up for my project. Thank you for the great insight and write up.

Soobarubin, I'm really in PF, but most wouldn't know where that would be, I drive a '10 Access Cab Tacoma, haven't posted a build thread yet, but thought I might as soon as I get my photos lined up, have a few basics down - Suspension, Sleep platform, Battery, Tires - then went to the...

Thanks for everyones in put thus far, I have a reciever hitch but was thinking more on the line of what is being called a chain tie down, I was thinking of changeing those for something else,but not sure what . . . I have seen how the ARB front bumper has points and well was thinking the same...

Hello Folks, Just the Guy with the "White" Tacoma, now dirty thanks to Ms. Cristina . . :bowdown: While driving back home, the wheels started turning (no puns, haha) about the recovery class, I would like to here your ideas and thoughts on keepin my rear bumper stock, but looking for recovery...

Hey nr13, I'll post a new thread as to not step on your build Scott:Wow1: